PacketiX.NET vpn client installation on linux dan Windows



 

PacketiX.NET vpn client installation on linux 

recently i’m been using packetix.net vpn and the speed is quite good… unfortunately there’s not many guide on how to use the client on linux, so i’m writing one.

this gonna be very long..so bear with me till the end ..huhu

0. to make things easier, lets transform into root :D
sudo su && cd

1. now, make a folder name vpn and download the vpnclient file from their web http://packetix.net/en/secure/install/
mkdir vpn && cd vpn
wget -c http://packetix.net/en/special/files/vpn2_5350_en/vpnclient-5350a-rtm-en-linux-x86.tar.gz

2. now to compile this files, you need zlib, openssl, readline and ncurses.
apt-get install zlib1g-dev libreadline5-dev

3. once finish,extract the file and continue with compile
tar -zxvf vpnclient-5350a-rtm-en-linux-x86.tar.gz && cd vpnclient* && make
4. connecting/tunneling to packettix.net
./vpnclient start
./vpncmd

5. inside vpncmd
choose number 2
[2] Management of VPN Clinet and input localhost as the destination host
u will see something like this…
Input destination: localhost
Connected to VPN Client “localhost“.
VPN Client>

6. now configuring your connection….read..and follow
root@bur8:~/vpnclient> ./vpncmd
vpncmd command – PacketiX VPN Command Line Management Utility
PacketiX VPN Command Line Management Utility (vpncmd command)
Version 2.20 Build 5350   (English)
Compiled Oct  9 2007 01:27:58 by yagi at ILC308
Copyright (C) 2004-2007 SoftEther Corporation. All Rights Reserved.
By using vpncmd program, the following can be achieved.
1. Management of VPN Server or VPN Bridge
2. Management of VPN Clinet
3. Use of VPN Tools (certificate creation and communication speed measurement)

Select 1, 2 or 3: 2

Specify the host name or IP address of the computer that the destination VPN Client is operating on.
If nothing is input and Enter is pressed, connection will be made to localhost (this computer).
Input destination: localhost

Connected to VPN Client “localhost“.
VPN Client>niccreate
NicCreate command – Create New Virtual Network Adapter
Virtual Network Adapter Name: 0
The command terminated normally.

*** now lets configure our account and connection

VPN Client>niclist
NicList command – Get List of Virtual Network Adapters
Item                        |Value
—————————-+———————————–
Virtual Network Adapter Name|0
Status                      |Enabled
MAC Address                 |00AC9D035CF6
Version                     |Version 2.20 Build 5350   (English)
The command terminated normally.

VPN Client>accountcreate
AccountCreate command – Create New VPN Connection Setting
Name of VPN Connection Setting: VPN
Destination VPN Server Host Name and Port Number: public.softether.com:443
Destination Virtual HUB Name: PUBLIC
Connecting User Name: PUBLIC
Used Virtual Network Adapter Name: 0
The command terminated normally.

VPN Client>accountlist
AccountList command – Get List of VPN Connection Settings
Item                        |Value
—————————-+———————————————–
VPN Connection Setting Name |VPN
Status                      |Offline
VPN Server Address          |public.softether.com (Direct TCP/IP Connection)
Virtual Network Adapter Name|0
The command terminated normally.

VPN Client>accountconnect
AccountConnect command – Start Connection to VPN Server using VPN Connection Setting
Name of VPN Connection Setting: VPN
The command terminated normally.

*** wait for awhile and list the account again

VPN Client>accountlist
AccountList command – Get List of VPN Connection Settings
Item                        |Value
—————————-+———————————————–
VPN Connection Setting Name |VPN
Status                      |Connected
VPN Server Address          |public.softether.com (Direct TCP/IP Connection)
Virtual Network Adapter Name|0
The command terminated normally.

*** set this as default connection everytime vpnclient started

VPN Client>AccountStartupSet
AccountStartupSet command – Set VPN Connection Setting as Startup Connection
Name of VPN Connection Setting: VPN
VPN Client>quit

7. now check for connection… note the value of _0 at the end of vpn
root@bur8:~/vpnclient> ifconfig vpn_0
vpn_0 Link encap:Ethernet  HWaddr 00:ac:9d:03:5c:f6
UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
RX packets:1603 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:500
RX bytes:463867 (463.8 KB)  TX bytes:0 (0.0 B)

7. get dhcp from vpn
root@bur8:~/vpnclient> dhclient vpn_0
Listening on LPF/vpn_0/00:ac:9d:03:5c:f6
Sending on   LPF/vpn_0/00:ac:9d:03:5c:f6
Sending on   Socket/fallback
DHCPREQUEST of 10.3.83.250 on vpn_0 to 255.255.255.255 port 67
DHCPACK of 10.3.83.250 from 10.0.0.1
bound to 10.3.83.250 — renewal in 437751335 seconds.

root@bur8:~/vpnclient> ifconfig vpn_0
vpn_0     Link encap:Ethernet  HWaddr 00:ac:9d:03:5c:f6
inet addr:10.3.83.250 Bcast:10.255.255.255 Mask:255.0.0.0

now you can start routing you connection to vpn..
sorry but this is a noob routing technique…it will redirect all your traffic to vpn

route del default
route add default dev vpn_0

for more about how to do advance routing in linux please refer tohttp://lartc.org/howto/index.html
p/s: to back to your current connection.. stop the service and reroute back to your original gateway.
in my case
./vpnclient stop
route del default
route add default dev ppp0
where ppp0 is my celcom 3g modem interface

for those who didn’t know what the hell packetix.net is….

PacketiX.NET is an academic, non-profit online environment for PacketiX VPN, the VPN technology developed by SoftEther Corporation.

more info please visit their website at http://packetix.net/en/

update: you need to enable ipforwarding or else you won’t be able to connect to internet.
$ echo 1 > /proc/sys/net/ipv4/ip_forward
or simply edit your /etc/sysctl.conf file

hope it this guide will give benefit to everyone.. thank you😉

Tanpa basa basi lagi lsg aja yah…
Download dulu VPN Client nya disini 


Adapun cara penggunaan
1. Buka PacketiX VPN Client Manager
2. Buka menu Connect > New VPN connection setting
3. Isi parameter sesuai dengan kolom
(Disini sesuai dengan VPN server tujuan yang kamu inginkan untuk di connect).
Saya akan mmembuat contoh dengan nama ExampleVPN_Imzers.org dan server tujuan adalah 130.158.6.51 (Kebetulan server milik Jepang ini memperbolehkan koneksi VPN tanpa username dan password [anonymous] ke server mereka pada virtual hub public dengan username public

– Setting Name: ExampleVPN_Imzers.org
– Host Name: 130.158.6.51
– Port number: (disini sesuai dengan koneksi kamu)
Standart = 8888, HTTPS = 443, Telnet = 992
(disini saya menggunakan standart)
– Proxy type: optional, kalau kamu menggunakan proxy (Disini saya menggunakan direct with no-proxy).
– Auth type: Pilih anonymous authentication
– Auththentication username: public
4. Kemudian Oke
5. Klik kanan Nama Account > Pilih Connect
6. Koneksi pun berlangsung, tunggu sampai kamu mendapat IP client (assign by DHCP)
7. VPN akan terkoneksi dengan IP yang otomatis diberikan dari server (DHCP)

Semoga bermanfaat

Source and Here 

PacketiX.NET vpn client installation on linux dan Windows

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s